Positive Pressure Bin Pump
Dense Phase Tank-type Pneumatic Conveying Bin Pump, abbreviated as Bin Pump or Pneumatic Conveying Bin Pump, is a pneumatic conveying system specifically designed for highly abrasive powdered and granular materials. It integrates advanced material handling technology with intelligent control, achieving disruptive upgrades in energy consumption reduction, maintenance cost minimization and zero dust leakage.
Confirm normal pressure in the tank (otherwise release pressure manually) → Open vent valve → Open feed valve → End material feeding (time/level/weight) → Close feed valve & vent valve. When the tank pressure reaches the conveying set point (e.g., 0.1 MPa), the discharge valve opens. Simultaneously, the air replenishment valve of the bottom horn-shaped elbow opens, initiating material conveying. If the pressure exceeds the limit, the intake valve closes immediately. Conveying and fluidization resume after pressure reduction.
-
Fluidized Energy-saving System
Bottom & side 3D air distribution + Smart air replenishment module enable reduced energy consumption and increased conveying efficiency. -
Wear-resistant System
Sandwich tank structure (304 stainless steel + Cushioning interlayer + Ceramic lining) decrease maintenance costs and extend service life of the equipment by 2 times. -
Modular Design
Standardized interface + Multi-pump cluster control + Load cell expansion shorten installation cycle and reduce upgrade costs. -
Five-level Protection System
Overpressure Alarm → Automatic Pressure Relief → Valve Interlock → Fault Self-check → Emergency Shutdown to reduce safety incident rate. -
Full-process Monitoring
Data Visualization + AI Fault Prediction + Remote O&M reduce failure rate.
-
Mining IndustryThe bin pump can be used for conveying coal, ores and other solid materials from mining sites to processing plants or storage areas. In addition, it can be applied for material transfer during mineral processing operations.
-
Chemical IndustryThe bin pump is suitable for conveying various chemical raw materials, including plastic pellets, fertilizers, sulfur, etc. It can also be used for material transfer between different production workshops within chemical plants.
-
Grain Storage & TradingThe bin pump can be used for conveying grains from the warehouse to loading/processing areas, or for precise measurement and transportation in grain trading.
-
Power Generation IndustryIn coal-fired power plants, the bin pump is used to convey pulverized coal and handle by-products such as FGD gypsum.
-
Building Materials IndustryDuring the production and handling of cement, limestone, gypsum and other construction materials, the bin pump is applied to transport raw materials or finished products between processing stages.
-
Chemical IndustryThe bin pump is suitable for conveying various chemical raw materials, including plastic pellets, fertilizers, sulfur, etc. It can also be used for material transfer between different production workshops within chemical plants.
-
New Material IndustryConsidering the particularity of the new material industry, SOPHON provides customized material conveying solutions to handle special materials with high temperature, high viscosity and corrosion.
-
Pharmaceutical IndustryTo meet the requirements of high cleanliness and sterility for material conveyance in the pharmaceutical industry, SOPHON adopts special materials and sealing design to effectively prevent cross-contamination and ensure the safety and effectiveness of drug production.
-
Plastic IndustrySOPHON provides precise and efficient material conveying systems in the plastic industry that can handle both raw material particles and finished plastics, ensuring the continuity of production process and product quality.
